Gu'an County Hot Spring Leisure Business Industrial Park Weiheng Filtration Equipment Factory

#>Cement tank silo roof dust collector
1. Product Overview
The silo roof dust collector is a single dust removal equipment with an automatic dust cleaning structure. This type of dust collector is used in cement ore powder mining, It is widely used in industrial and mining enterprises such as metallurgy, building materials, machinery, chemical industry, and food processing to filter fine non-fibrous dry dust in the gas or to recover dry powder in the process.
When the dust concentration of the dust collector on the top of the warehouse is mm/cubic material-mg/cubic meter, its resistance does not exceed kg/square meter, and its dust removal efficiency is as high as %
2. Structure introduction
Warehouse The top dust collector is a circular detachable metal filter cartridge with a circular hole embedded in the bottom plate. It is equipped with a filter element that is fastened to the hanger of a vibrator at the upper end and vibrates regularly to make the dust trapped by the filter element fall into the bin. Inside.
The dust collector on the top of the warehouse is generally composed of a vibration motor bracket, a rainproof cap, an upper barrel box, an electrical box, a vibration box, a filter element, a seal, a barrel box protective net, a connection clip, a welding flange seal, etc.
3. Purpose of the silo roof dust collector
The silo roof dust collector is designed based on the passing pore diameter of various powdery substances such as cement, ballast ash, lime, etc. The maximum diameter and attachment of particles passing through the dust collector filter element are The influence of force on the pore size of the filter element can fully meet the filtration requirements of various powdery substances. That is to say, it meets the requirements of air conveying in bulk vehicles and air conveying after dismantling of finished equipment. It can also ensure that there is no negative pressure in the warehouse when powder materials are used.
, the filtering area is up to - square meters and the area is smaller. , installation and maintenance are quick and convenient. , Vibrating cleaning operation is simple. , The cassette filter element is made of imported materials. , The main raw materials are imported from Germany. , moderate performance-price ratio.
4. The working principle of the dust collector on the top of the silo: the welding flange is welded to the cement silo (or other powder container) as a support for the dust collector. Use a connecting clip to seal and connect the sealed cylinder box and the welding flange into one body. The vibration plate is sandwiched between the sealing cylinder and the upper cylinder box. The filter element interferes with the vibration plate assembly. In this way, the filter element sealing cylinder box, the vibration plate welding flange and the cement silo form a common filter element that can be filtered with the upper cylinder box and connected to the barrel body. . At the same time, the upper cylinder box is connected to the atmosphere for gas discharge or replenishment. When the bulk cement pump truck delivers powder to the silo, there is a certain pressure difference between the inside and outside of the cement silo. The gas is discharged from the inside of the silo to the outside. The filter element is used to filter the dust to purify the air. When the screw machine supplies material to the powder-consuming machinery, the pressure in the silo is less than Atmospheric pressure supplies air from the atmosphere to the warehouse so that the screw machine can work normally.